Jiangsu TISCO TPCO Metal Products Co.,Ltd.
Jiangsu TISCO TPCO Metal Products Co.,Ltd.
Add to Cart
Hot Dipped Galvanized Coil Thick 0.3mm 0.4mm 0.8mm Z120g Dx51d Zinc Galvanized Carbon Steel Sheet Coil
What is Galvanised steel used for?
Galvanized steel is all around us, in a whole variety of industries including road, rail, energy plants, oil and gas, agriculture, water and waste and sports and leisure. It can play an important role for buildings, bridges, facades, signal gantries, gates, balconies and even sculptures. Wherever there is a risk for corrosion of steel, galvanising should be used.
| Thick | 0.12 ~6.0 mm |
| Width | 600-1500 mm |
| Zinc Coating | 30~275G/M2 |
| Coil ID | 508 / 610MM |
| Coil Weight | 3-5 Tons |
| Standard | ASTM-A653; JIS G3302; EN10147; EN10326etc |
| Payment Terms | T/T, LC,DP. |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details |
| Hardness | Soft hard(HRB60),medium hard(HRB60-85),full hard(HRB85-95) |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| Surface Treatment | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
Different Surface:Small,Large,Zero.Select as per your requirement
| Content | |||
| Material: | SG550/SG280/SG350DX51D+Z | SGCC/ CS TYPE | |
| Finish | NBMinimized Spangle (M) | ||
| Surface Treatment | Chemically Passivated (C) | ||
| Oil | Not Oiled | ||
| Zinc | Z30--275 | ||
| Thickness tolerances | Normal thickness tolerances | 0.40 < thickness ≤ 0.60 | ± 0.060 |
| 0.60 < thickness ≤ 0.80 | ± 0.070 | ||
| 0.80 < thickness ≤ 1.00 | ± 0.080 | ||
| 1.00 < thickness ≤ 1.20 | |||
| Width tolerances | 1200 < width ≤ 1500 | 6 ~ 0 | |
Chemical composition
| Designation | Chemical composition % by mass max. | ||||||
| Steel grade | C | Si | Mn | P | S | TI | |
| Steel name | Symbols for the types of available coatings | ||||||
| DX51D | +Z | 0.18 | 0.5 | 1.2 | 0.12 | 0.045 | 0.3 |