Jiangsu TISCO TPCO Metal Products Co.,Ltd.
Jiangsu TISCO TPCO Metal Products Co.,Ltd.
Add to Cart
Hot Dipped Az150 G550 Gl 1mm Carbon Steel Galvanized Steel Coil
What is a galvanized steel coil?
Hot dipped galvanized steel sheet & coil is made of carbon steel coated in zinc utilizing the hot-dip process. The end result of this process is a layer of zinc on each side of the steel sheet or coil that is tightly adhered to the steel through the formation of an iron-zinc alloy bonding layer.
| Thick | 0.12 ~6.0 mm |
| Width | 600-1500 mm |
| Zinc Coating | 30~275G/M2 |
| Coil ID | 508 / 610MM |
| Coil Weight | 3-5 Tons |
| Standard | ASTM-A653; JIS G3302; EN10147; EN10326etc |
| Payment Terms | T/T, LC,DP. |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details |
| Hardness | Soft hard(HRB60),medium hard(HRB60-85),full hard(HRB85-95) |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| Surface Treatment | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
Different Surface:Small,Large,Zero.Select as per your requirement
| Content | |||
| Material: | SG550/SG280/SG350DX51D+Z | SGCC/ CS TYPE | |
| Finish | NBMinimized Spangle (M) | ||
| Surface Treatment | Chemically Passivated (C) | ||
| Oil | Not Oiled | ||
| Zinc | Z30--275 | ||
| Thickness tolerances | Normal thickness tolerances | 0.40 < thickness ≤ 0.60 | ± 0.060 |
| 0.60 < thickness ≤ 0.80 | ± 0.070 | ||
| 0.80 < thickness ≤ 1.00 | ± 0.080 | ||
| 1.00 < thickness ≤ 1.20 | |||
| Width tolerances | 1200 < width ≤ 1500 | 6 ~ 0 | |
Chemical composition
| Designation | Chemical composition % by mass max. | ||||||
| Steel grade | C | Si | Mn | P | S | TI | |
| Steel name | Symbols for the types of available coatings | ||||||
| DX51D | +Z | 0.18 | 0.5 | 1.2 | 0.12 | 0.045 | 0.3 |